Agilent Technologies N8900 series Operating Manual page 15

Specifications and Characteristics
Common Characteristics (typical)
Characteristic
Command Response Time:
Savable States:
Analog Programming
Input range:
Accuracy:
Input impedance:
Computer Interfaces
LXI Core 2011:
USB:
GPIB:
Language:
Acoustic Noise Declaration
At maximum fan speed:
At idle
Regulatory Compliance:
EMC:
Safety:
Environmental
Operating environment:
Temperature range:
Relative humidity:
Altitude:
Storage temperature:
Negative Output Terminal
Isolation:
Fuses:
Weight:
14
< 25 ms
10
0 to 5 V or 0 to 10 V (selectable)
Specified instrument accuracy ±0.2% of rating
150 kΩ (referenced to ground)
10/100 Base-T Ethernet (Sockets, VXI-11 protocol, Web user interface)
USB 2.0 (USB-TMC488)
GPIB IEEE 488
SCPI - 1993, IEEE 488.2 compliant
57 dBA for 5kw units; 62 dBA for 10 kW units; 72.6 dBA for 15 kw units
48 dBA for 5kw units; 51 dBA for 10 kW units; 52 dBA for 15 kw units
Complies with European EMC Directive for test and measurement products
Complies with Australian standard and carries C-Tick mark
This ISM device complies with Canadian ICES-001
Cet appareil ISM est conforme à la norme NMB-001 du Canada
Complies with European Low Voltage Directive and carries the CE-marking.
Conforms to US and Canadian safety regulations.
Not applicable for IT mains supply systems
Declarations of Conformity for this product may be downloaded from the
Web. Go to http://regulations.corporate.agilent.com
ations of Conformity."
Indoor use, installation category II (for AC input), pollution degree 2
0°C to 45°C
80% or less (non-condensing)
Up to 2000 meters
-20°C to 70°C
± 300 V from ground for ALL models. This means that you cannot ground
the + output terminal of units rated higher than 300 V.
Internal fuses; not customer accessible
5 kw models: 19.8 kg. (43.5 lbs.)
10 kw models: 25.5 kg. (56 lbs.)
15 k W models: 33 kg. (72.6 lbs.)
All Models
and click on "Declar-
Agilent N8900 Series Operating and Service Guide