Specifications And Characteristics - Agilent Technologies N8900 series Operating Manual

Specifications and Characteristics

Specifications
Supplemental Characteristics (typical)
Common Characteristics (typical)
Unless otherwise noted, specifications are warranted over the ambient temperature range of 0°C to 45°C after a 30-
minute warm-up period. Specifications apply from >2% to 100% of rated voltage and from >1% to 100% of rated cur-
rent, measured at the output terminals with local sensing (sense terminals not connected).
Supplemental characteristics are not warranted but are descriptions of performance determined either by design or by
type testing. All supplemental characteristics are typical unless otherwise noted.
Specifications and characteristics are subject to change without notice.
Specifications
Specification 5 kW
DC Ratings
Voltage:
Current:
Power:
Output ripple & noise 1
CV rms:
CV peak-to-peak:
Load regulation
Voltage:
Current:
Voltage programming &
measurement accuracy 2
Current programming &
measurement accuracy 2
Transient response 3
Recovery Time:
Settling band:
Agilent N8900 Series Operating and Service Guide
N8920A N8921A
N8940A N8941A
0 - 80 V 0 - 200 V
0 - 170 A 0 - 70 A
5 kW 5 kW
16 mV 40 mV
200 mV 300 mV
40 mV 100 mV
255 mA 105 mA
≤ 80 mV ≤ 200 mV
≤ 340 mA ≤ 140 mA
1.5 ms 1.5 ms
0.8 V 2 V
Specifications and Characteristics
N8923A N8924A
N8943A N8944A
0 - 500 V 0 - 750 V
0 - 30 A 0 - 20 A
5 kW 5 kW
70 mV 200 mV
350 mV 800 mV
250 mV 375 mV
45 mA 30 mA
≤ 500 mV ≤ 750 mV
≤ 60 mA ≤ 40 mA
1.5 ms 1.5 ms
5 V 7.5 V
9