Front Panel Menu Reference - Agilent Technologies N8900 series Operating Manual

Front Panel Menu Reference

Front Panel Menu Reference
This is an overview of the front-panel menus.
Press the Menu key to access the front panel menus.
For a brief tutorial on how to navigate the front panel menu, refer to
1st Menu
2nd Level
Level
Output Voltage
Current
Transient Mode
Step
Protect OVP
OCP
Clear
States Reset
SaveRecall
PowerOn
System IO
20
3rd & 4th
Levels
Programs output voltage settings
Programs output current settings
Selects voltage and current transient modes
Programs the voltage and current step settings
Configures over-voltage protection settings
Configures over-current protection settings
Clears protection conditions and displays output status
Resets all instrument settings to the reset (*RST) state
Saves and recalls instrument settings
Selects the power-on instrument state
LAN Displays LAN commands
Settings View the currently active network settings
Modify the network configuration
Modify
(IP, Name, DNS, WINS, mDNS, Services)
Apply Applies the configuration changes and restarts
Cancel Cancels the configuration changes
Reset Performs an LXI LCI reset of LAN settings and restarts
Defaults Resets the network to the as-shipped defaults and restarts
USB Displays USB identification string
GPIB Display or change the GPIB address
Analog Sets the analog interface amplitude (5 V or 10 V)
Use the front panel menu.
Description
Agilent N8900 Series Operating and Service Guide