Initiate Commands - Agilent Technologies N8900 series Operating Manual

*RCL <value>
*RST
*SAV <value>
*SRE <value>
*STB?
*TRG
*TST?
*WAI

INITiate Commands

INITiate
[:IMMediate]
:TRANsient
:CONTinuous
:TRANsient 0|OFF|1|ON
LXI Command
LXI
:IDENtify
:STATe 0|OFF|1|ON
MEASure Commands
MEASure
[:SCALar]
:CURRent
[:DC]?
:POWer
[:DC]?
:VOLTage
[:DC]?
OUTPut Commands
OUTPut
[:STATe] 0|OFF|1|ON
:PON
:STATe RST|RCL0
:PROTection
:CLEar
Agilent N8900 Series Operating and Service Guide
Recalls a saved instrument state
Reset
Saves an instrument state
Set service request enable register
Return status byte
Trigger
Performs self-test, then returns result
Pauses additional command processing until all device commands are done
Initiates the transient trigger system.
Continuously initiates the transient trigger system.
Turns the front panel LXI identify indicator on or off.
Takes a measurement; returns the averaged current.
Takes a measurement; returns the averaged power.
Takes a measurement; returns the averaged voltage.
Enables or disables the output.
Sets the output power-on state.
Resets the latched protection.
Command Quick Reference
105