Set The Output Current - Agilent Technologies N8900 series Operating Manual

Getting Started
Method 2
Use the left and right navigation keys to navigate to the setting that you wish to change.
In the following display, the voltage setting is selected. Enter a value using the numeric keypad. Then press Select.
You can also use the numeric arrow keys to adjust the value up or down. Values become effective when the output is
enabled.
Method 3
Use the Voltage key to select the voltage entry field. In the display below, the voltage setting is selected. Enter the
desired setting using the numeric keypad. Then press Enter.
If you make a mistake, either use the backspace key to delete the number, press Back to back out of the menu, or
press Meter to return to meter mode.

Set the Output Current

Method 1
Turn the Current knob to set the output current. The setting value appears in the Set field on the bottom of the display.
Agilent N8900 Series Operating and Service Guide 41