Table of Contents
Advertisement
Keep current IP address setting – You may either keep the current IP address or
reset the IP to the default IP address. Use the Space key to make the change.
Keep current username and password – You may either keep the current
username and password or reset to default username and password (root/root). Use
the Space key to make the change.
Once you have checked the appropriate settings, click Default to reset.
5.32
Save Configuration
Once you have made changes to the system, you must use Save All Configuration
from the Main Menu to ensure that all changes are saved.
1.
Click on Save Configuration.
2.
Click on Save to save the configuration to the flash memory.
5.33
Reboot the System
Once changes have been made, the system should be rebooted to apply the changes.
1.
Choose Reboot System from the Main Menu.
2.
Click on Reboot to reboot the system.
Waters Network Systems
Figure 5.45 – Factory Default Interface
MS1008-2G-4POE/PSX1008-2G-4PoE User's Manual
Page 72
Advertisement
Table of Contents
