Table of Contents
Advertisement
Proceed as follows:
Caution
There can be a high build-up of static charge when vacuuming the toner spill.
Always use an industrial vacuum cleaner with a grounded suction tube, rubber
nozzle and filter set for fine dust. For larger quantities of toner spill (e. g. full bottle),
the industrial vacuum cleaner must be explosion-proof.
7.
Important
Keep the empty toner bottle. This is used as the replacement for a full waste toner
bottle.
Installing the toner bottle
Caution
Observe the safety directives before installing the toner bottle (see section 7.2.1
Replacing the toner bottle, page 226).
Proceed as follows:
1.
Make sure you use the correct toner type.
Shake the new, closed toner bottle well to loosen the toner.
Important
Possibility of mistaking fresh toner bottle for waste toner bottle.
Only refill with original, sealed toner bottles secured by an intact banderole.
A29246-X20-X-4-7680 / fa701.fm
7.2.1 Replacing the toner bottle
Remove the toner bottle from the
container.
If toner is still present in and around the
container, remove with a vacuum
cleaner.
3 of 3
1 of 3
229
Advertisement
Table of Contents
