Oce VarioStream 7000 SINGLE Operating Manual page 53

Pos. Key
3
4
5
6
7 C-EJECT
8 STOP
A29246-X20-X-4-7680 / fa301.fm
Function
switches on the tension rollers in the stacker top. Pressing the key
again deactivates them.
After a period of 10 seconds, the tension rollers are automatically
powered down (not while paper is being inserted).
This key has no function during the preparation phase of the printing
system.
Requirement:
• This function can only be executed in "Stop" status.
completely lowers the stacker tray slide and deactivates it. This is
necessary when stacking very short forms.
The indicator light above lights up.
Pressing the key again - and every new paper insertion - reactivates
the stacker tray slide, which improves stacker behavior even for large
stack heights. The associated indicator lamp goes out.
Raises and/or lowers the stacker top.
Pressing the key again before the end position is reached stops the
movement.
Pressing this key will carry out an EJECT operation for twin and/or
triplex operation.
switches the printing system to the "Stop" status
or
cancels current function
The orange indicator light above the key lights up and the green
READY indicator light goes out. "Not ready" is displayed in the basic
menu.
Before the printing system stops, the pages prepared on the PC drum
are transferred to the paper. The paper stops at the start of a page.
Characters on the paper between paper transporter and fuser station
are not yet fused.
The printing system is made operational again by pressing the
READY key.
3.3.2 Stacker operator panel
2 of 2
53