Table of Contents
Advertisement
5.12 Powering off the printing system
Proceed as follows:
5.
If you want to deactivate the printing system after the job is finished, but no paper
end is present, an artificial paper end must be generated beforehand:
Cut paper web.
6.
Press the EJECT key until the paper is placed in the stacker.
7.
On the operator panel, click the following button:
and confirm:
Important
Observe waiting period
The controller requires this time to back up the data. Powering off prematurely via
the main circuit breaker can lead to data loss.
8.
Note
If the optional High Temperature Kit is used, the external recooling system must also
be powered off again.
174
Only if the printing system is also to be
detached from the line power supply:
Turn the main circuit breaker on the
right side of the printing system to the
"O" position.
A29246-X20-X-4-7680 / fa510.fm
2 of 2
Advertisement
Table of Contents
