Oce VarioStream 7000 SINGLE Operating Manual page 77

Menu
<Remote diagnostics>
<Setup>
<Setup channel A / B / C>
<Setup channel A / B / C>
<Setup channel A / B / C>
<Replace consumables>
<Replace active filter>
<Replace pressure roller>
<Replace corotrons>
<Replace developer>
<Fill developer>
<Replace heater>
<Replace fine filter>
<Replace fuser oil bottle>
<Replace fuser roller>
<Replace photoconductor drum>
<Run in photoconductor drum>
<Replace cleaning brush>
<Replace cleaning belt>
<Replace toner bottle>
<Fill toner box>
<Replace waste toner bottle>
<Toner bottle identification>
<Replace transfer roller>
<Replace transfer foil>
A29246-X20-X-4-7680 / fa400.fm
4.2.2.2 Menus<VarioStream>
Description
Activate or deactivate remote access by the
service
Display and edit the globally valid print job
setups
Display and edit setups for channel A
Display and edit setups for channel B
Display and edit setups for channel C
The sub-menus contain the procedures for
replacing consumables and expendables
Procedure for replacing the active filter
Procedure for replacing the pressure roller.
Procedure for replacing the transfer, charge and
discharge corotrons
Procedure for draining or filling the developer in
the developer station
Procedure for filling the developer in the
developer station
Procedure for replacing the heater
Procedure for replacing the fine filter
Procedure for replacing the fuser oil bottle.
Procedure for replacing the fuser roller
Procedure for replacing the photoconductor
drum
Procedure for inserting the photoconductor
drum
Procedure for replacing the cleaning brush
Procedure for replacing the cleaning belt
Procedure for replacing the toner bottle
Procedure for filling the toner box
Procedure for replacing the waste toner bottle
Displays information on the toner used
Procedure for replacing the transfer roller
Procedure for replacing the transfer foil
4 of 4
77