Table of Contents
Advertisement
Cleaning materials and equipment
Cleaning materials/
equipment
Round brush
Soft cloth
Soft brush
Vacuum cleaner
Cleaning foil
Cleaning felt with handle
Cleaning felt with angled
handle
366
Purpose
Cleaning the toner dust
indicator
Cleaning surfaces
To clean areas that are
not easily accessible
To remove paper dust
and residue, toner and
developer residue/spill
To clean the paper width
sensor
To clean the paper edge
sensor
To clean the paper width
sensor
Remarks
Standard store-bought quality
e.g. pipe cleaners EGRA-bunt,
OLDENKOTT, etc.
MOLTOPREN or similar
1 cm (1/2") round brushes and 2" flat
brushes, standard store-bought quality
with NYLON or hair bristles.
Do not use brushes with metal casings.
Caution
Always use an industrial vacuum
cleaner with a grounded suction tube,
rubber nozzle and filter set for fine
dust. For larger quantities of toner
spill
(e. g. 1 bottle), the industrial vacuum
cleaner must be explosion-proof.
supplied; available only from Océ Printing
Systems
supplied; available only from Océ Printing
Systems
supplied; available only from Océ Printing
Systems
A29246-X20-X-4-7680 / faA01.fm
2 of 2
Advertisement
Table of Contents
