Table of Contents
Advertisement
7.2.5 Replacing the fuser oil bottle
Install the fuser oil bottle
Caution
Observe the safety directives before installing the fuser oil bottle (see section 7.2.5
Replacing the fuser oil bottle, page 252).
Proceed as follows:
1.
2.
Wipe away any spilled oil with a paper towel.
Important
The hose can bend. The fuser oil cannot be filled in this case.
Ensure that the hose is not bent when you tip back the vacuum container.
3.
254
Insert the new fuser oil container so
that the handle points outwards.
Swivel back the fuser oil bottle holder
with the full fuser oil bottle. Make sure
that there is no bend in the hose.
A29246-X20-X-4-7680 / fa701.fm
1 of 2
Advertisement
Table of Contents
