Table of Contents
Advertisement
Proceed as follows:
Caution
The surface of the photoconductor drum is extremely sensitive and can be easily
damaged.
Avoid direct exposure to the sun and do not touch.
1.
Grasp the new PC drum by the handle frame and carefully remove from the
packaging.
2.
Note the "DRUM TYPE:" number specified on the photoconductor drum packaging.
Caution
Danger of damage to the cleaning blade.
When inserting the photoconductor drum, ensure that the cleaning blade on the
charge corotron is not damaged.
3.
4.
A29246-X20-X-4-7680 / fa701.fm
7.3.1 Replacing the photoconductor drum
Push in photoconductor drum to the
stop point via the guide rails.
Push the flange back onto the guide
rails.
Align the flange mark to its associated
mark on the guide rail.
1 of 2
261
Advertisement
Table of Contents
