Table of Contents
Advertisement
5.9.2.2 Installing the developer station
Proceed as follows:
11.
Final tasks for installing the developer station >>> page 160
Final tasks for installing the developer station
Proceed as follows:
1.
2.
Insert the toner suction hose to the stop point in the developer station.
3.
4.
Take the toner hose from the mounting on the toner feed unit and push to the stop
point on the developer station connecting pipe.
5.
Check whether all hoses are pushed onto the connecting pipes up to the stop point.
160
Remove the toner suction hose and
vacuum hose from the rubber
mounting.
Push vacuum hose to the stop point on
the developer station connecting pipe.
A29246-X20-X-4-7680 / fa509.fm
5 of 5
1 of 3
Advertisement
Table of Contents
