7.3.9 Replacing the pressure roller
Proceed as follows:
10.
11.
Note
Allow the printing system to cool down in this state for approximately 30 minutes.
12.
13. Carefully remove the pressure roller and place on paper surface.
322
Swivel off the cover underneath the
fuser station.
Press opening lever to the left and
carefully swivel down roller saddle.
Grasp pressure roller from below and
hold in the center.
Open the locking pins on the right and
left sides.
A29246-X20-X-4-7680 / fa703.fm
3 of 3