Table of Contents
Advertisement
Proceed as follows:
5.
Caution
The components in the fuser station reach a surface temperature of approximately
o
230
If you touch them, you may burn yourself.
Allow the printing system to cool down for at least 30 minutes.
6.
Allow printing system to cool down for at least 30 minutes.
7.
A29246-X20-X-4-7680 / fa703.fm
C in operation.
7.3.7 Replacing the heater
Turn the knob of the oiling unit to the
left and swivel on oiling unit.
Lift up the active filter unit on the right
side using the handle and swivel out by
the rotary axle.
2 of 5
303
Advertisement
Table of Contents
