Table of Contents
Advertisement
7.3.6 Replacing the cleaning belt
Proceed as follows:
5.
Caution
The components in the fuser station reach a surface temperature of approximately
230
If you touch them, you may burn yourself.
Put on heat protection gloves before you continue.
6.
Put on heat protection gloves.
7.
298
o
C in operation.
3
4
Turn the knob of the oiling unit to the
left and swivel on oiling unit.
Press the empty and the used cleaning
belt roller against the right spring
support and remove. Place cleaning
belt in old packaging.
2
A29246-X20-X-4-7680 / fa703.fm
2 of 2
Advertisement
Table of Contents
