Table of Contents
Advertisement
Install heater
Caution
Observe the safety directives before installing the heater (see section 7.3.7
Replacing the heater, page 302).
Proceed as follows:
Caution
The heater glass may be damaged.
Grasp the heater by the handle only.
1.
Open packaging of the new heater.
Only grasp the heater by the handle and carefully remove from the packaging.
If required, hold the new heater by the cable on the other end with your other hand.
2.
A29246-X20-X-4-7680 / fa703.fm
7.3.7 Replacing the heater
Hold the heater by the handle part.
Straighten the front end of the cable.
Carefully insert the heater into the
fuser roller opening at the rear.
1 of 5
307
Advertisement
Table of Contents
