Table of Contents
Advertisement
Proceed as follows:
5.
Remove heater (see section Remove heater, page 302).
Caution
The components in the fuser station reach a surface temperature of approximately
o
230
If you touch them, you may burn yourself.
Put on heat protection gloves to continue working.
6.
Put on heat protection gloves.
7.
8.
Open the packaging of the new fuser roller at the end.
9.
A29246-X20-X-4-7680 / fa703.fm
C in operation.
7.3.8 Replacing the fuser roller
Press against the pressure pin and
swivel the waste collector outwards.
Remove the new fuser roller with the
plastic cover and place vertically on a
surface (the notch around the end
must be on top).
2 of 4
313
Advertisement
Table of Contents
