Table of Contents
Advertisement
6.7 Cleaning the developer station
Proceed as follows:
12.
13. Close the center and left door at the back of the printing system.
14. Close the door in front of the photoconductor drum.
15. Close the right door at the front of the printing system.
16. Click the following button to switch the printing system to the "Ready" status:
206
Remove vacuum hose from the rubber
clip and insert into the toner box until it
reaches the stop point.
A29246-X20-X-4-7680 / fa603.fm
4 of 4
Advertisement
Table of Contents
