Table of Contents
Advertisement
7.3.5 Replacing the active filter
Proceed as follows:
3.
Click the following button to start the active filter replacement:
Information on the icons displayed on the operator panel under "Worksteps":
see section Icons, page 93
Caution
The components in the fuser station reach a surface temperature of approximately
230
If you touch them, you may burn yourself.
Do not touch any parts behind the safety covers identified with the icon
4.
Open side door of fuser station.
5.
Caution
The components in the fuser station reach a surface temperature of approximately
230
If you touch them, you may burn yourself.
Put on heat protection gloves before you continue.
6.
Put on heat protection gloves.
292
o
C in operation.
o
C in operation.
Turn the knob of the oiling unit to the
left and swivel on oiling unit.
A29246-X20-X-4-7680 / fa703.fm
.
2 of 3
Advertisement
Table of Contents
