Oce VarioStream 7000 SINGLE Operating Manual page 76

4.2.2.2 Menus<VarioStream>
Menu
<Standard resources>
<Resource management>
<PCL mode>
<Properties>
<Continuous feed>
<Standard resources>
<Resource management>
<C/E mode>
<Properties>
<Channel extensions>
<Channels>
<Channel A / B / C>
<Channel A / B / C>
<Channel A / B / C>
<Special functions>
<Clean corotrons>
<Clean LED print head>
<Operator trace>
<Service ticket>
76
Description
Select and display standard resources for I-
Mode
Install new resources or
delete existing resources
The sub-menus contain the parameters for PCL
mode
Settings for job separation, alignment, print
mode, number of copies and lines per forms
overlay
Settings for specific parameters for continuous
printing in PCL mode
Select and enter standard resources for PCL
mode
Install new resources or
delete existing resources
The sub-menus contain the parameters for C/E
mode
Set general properties for C/E mode, specific
parameters for the EFO values, for 2-up and
print orientation
Settings for specific parameters for channel
extensions
Displays the current channel settings and
settings for channel control
Select and enter parameters for channel A
Select and enter parameters for channel B
Select and enter parameters for channel C
The sub-menus contain special parameters for
the printing system
Cleans all corotrons in the printing system
Cleans the LED print head
Write an error log
Display all data required to notify the service
center
A29246-X20-X-4-7680 / fa400.fm
3 of 4