Handlebar - Yamaha WR450F(S) Owner's Service Manual

EC5B0000

HANDLEBAR

Extent of removal:
Extent of removal
Preparation for removal
1
1 Handlebar removal
Order Part name
HANDLEBAR REMOVAL
Headlight
1 Hot starter cable
2 Hot starter lever holder
3 Clutch cable
4 Clutch lever holder
5 "ENGINE STOP" button
6 Master cylinder
7 Start switch
8 Throttle cable cap
9 Throttle cable #2 (pushed)
10 Throttle cable #1 (pulled)
11 Grip (right)
12 Tube guide
13 Cover (grip cap)
14 Grip (left)
15 Handlebar holder (upper)
16 Handlebar
HANDLEBAR
Q'ty
1 Disconnect at the lever side.
1
1 Disconnect at the lever side.
1 Disconnect the clutch switch lead.
1 Disconnect the "ENGINE STOP" button
lead.
1 Refer to "REMOVAL POINTS".
1 Disconnect the start switch lead.
1
1 Disconnect at the throttle side.
1 Disconnect at the throttle side.
1 Refer to "REMOVAL POINTS".
1
1
1 Refer to "REMOVAL POINTS".
2
1
5 - 40
CHAS
Remarks