Starter Clutch - Yamaha TT-R50E Owner's Service Manual

AC MAGNETO AND STARTER CLUTCH
1
INSPECTION

Starter clutch

1. Inspect:
2. Check:
É
È
ASSEMBLY AND INSTALLATION
Starter clutch
1. Install:
2. Unloosen the starter clutch assembly by
4 - 45
• Starter idle gear teeth a
• Starter drive gear teeth b
• Starter wheel gear teeth c
Burrs/chips/roughness/wear → Replace.
• Starter clutch operation.
Checking steps:
• Install the starter wheel gear onto the
starter clutch and hold the starter clutch.
• When turning the starter wheel gear clock-
wise È, the starter clutch and the starter
wheel gear should be engage, otherwise
the starter clutch is faulty and must be
replaced.
• When turning the starter wheel gear coun-
terclockwise É, it should turn freely, other-
wise the starter clutch is faulty and must
be replaced.
• Starter clutch 1
14 Nm (1.4 m · kg, 10 ft · lb)
using the center punch.
ENG