REMOVING THE GENERATOR
EASB291282
1. Remove:
• Generator rotor nut "1"
• Washer
1
2. Remove:
• Generator rotor "1"
(with the rotor puller "2")
• Woodruff key
Rotor puller
90890-04142
Rotor puller
YM-04142
1
2
EASB291283
CHECKING THE STARTER CLUTCH
1. Check:
• Starter clutch rollers
Damage/wear Replace.
GENERATOR AND STARTER CLUTCH
2. Check:
• Starter clutch idle gear
• Starter clutch gear
Burrs/chips/roughness/wear Replace the
defective part (s).
3. Check:
• Starter clutch gear
Damage/pitting/wear Replace the starter
clutch gear.
4. Check:
• Damper assembly
Damage/pitting/wear Replace the damp-
er assembly.
Check the gear of the starter motor arma-
ture.
5. Check:
• Starter clutch operation
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Install the starter clutch drive gear "1" onto
the starter clutch and hold the starter clutch.
b. When turning the starter clutch drive gear
clockwise "A", the starter clutch and the
starter clutch drive gear should engage, oth-
erwise the starter clutch is faulty and must
be replaced.
c. When turning the starter clutch drive gear
counterclockwise "B", it should turn freely,
otherwise the starter clutch is faulty and
must be replaced.
B
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
5-66
A
1