Engine Oil Replacement - Yamaha TT-R50E Owner's Service Manual

ENGINE OIL LEVEL INSPECTION/
1
2

ENGINE OIL REPLACEMENT

5. Install:
• Oil filler cap
6. Start the engine and let it warm up for sev-
eral minutes.
7. Turn off the engine and inspect the oil level
once again.
NOTE:
Wait a few minutes until the oil settles before
inspecting the oil level.
ENGINE OIL REPLACEMENT
1. Start the engine and warm it up for several
minutes, and then turn off the engine and
wait for five minutes.
2. Place the machine on a level place and
hold it on upright position by placing the
suitable stand under the engine.
3. Place a suitable container under the
engine.
4. Remove:
• Oil filler cap 1
• Drain bolt (with gasket) 2
Drain the crankcase of its oil.
5. Install:
• Gasket
• Drain bolt
6. Fill:
• Crankcase
7. Install:
• Oil filler cap
8. Inspect:
• Engine (for oil leaks)
• Oil level
Refer to "ENGINE OIL LEVEL INSPEC-
TION" section.
3 - 9
INSP
ADJ
New
20 Nm (2.0 m · kg, 14 ft · lb)
Oil quantity:
Periodic oil change:
0.8 L (0.70 Imp qt, 0.85 US qt)