Transmission, Shift Cam Shift Fork - Yamaha TT-R50E Owner's Service Manual

SHIFT FORK, SHIFT CAM AND TRANSMISSION
EC4H3000
REMOVAL POINTS
Shift fork, shift cam and transmission
1. Remove:
• Shift forks
• Shift cam
• Drive axle assembly
• Main axle assembly
NOTE:
• Remove the main axle, drive axle, shift cam
and shift forks all together by tapping lightly
on the transmission main axle and shift cam
with a soft hammer to remove.
• Remove assembly carefully. Note the posi-
tion of each part. Pay particular attention to
the location and direction of shift forks.
ASSEMBLY AND INSTALLATION

Transmission, shift cam shift fork

1. Install:
• Plain washer 1
• Circlip 2
NOTE:
• Be sure the circlip sharp-edged corner a is
positioned opposite side to the plain washer
and gear b.
• Be sure the circlip end c is positioned at
axle spline groove d.
4 - 56
ENG
New