Yamaha TT-R50E Owner's Service Manual page 186

1
2
FUSE INSPECTION
3. Check:
• Continuity
Checking steps:
• Remove the fuse 1.
• Connect the pocket tester to the fuse and
check the continuity.
NOTE:
Set the pocket tester selector to "Ω × 1".
Pocket tester:
YU-03112-C/90890-03112
• If the pocket tester indicates "∞", replace
the fuse.
2 Reserve fuse
4. Replace:
• Blown fuse
Replacement steps:
• Set the main switch to "OFF".
• Install a new fuse of the correct amperage.
• Set on the switches to verify if the electri-
cal circuit is operational.
• If the fuse immediately blows again, check
the electrical circuit.
Items
Main fuse
WARNING
Never use a fuse with an amperage rating
other than that specified. Improvising or
using a fuse with the wrong amperage rat-
ing may cause extensive damage to the
electrical system, cause the starting and
ignition systems to malfunction and could
possibly cause a fire.
5. Connect:
• Battery lead coupler
(to the battery terminals)
6. Install:
• Battery cover
• Seat assembly
3 - 31
INSP
ADJ
Amperage
Q'ty
rating
10 A 1