T1S Memory Mode Setting - Toshiba PROSEC T1 User Manual

6.5 T1S memory mode setting

The program capacity of the T1S is 8 k steps. However, user can set the T1S's program
capacity to 4 k steps. It is called the T1S's memory mode.
That is, the T1S has two memory modes, 8 k mode and 4 k mode.
In the 4 k mode, on-line program changes become available, although the program
capacity is limited to 4 k steps. Refer to section 6.9 for the on-line debug support
functions.
To set the T1S's memory mode, write 4 k or 8 k on the Program Size Setting of the
System Parameters using the programming tool. Then execute the EEPROM write
command.
NOTE
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
There is no memory mode setting for the standard T1. The program capacity of
the standard T1 is 2 k steps fixed.
6. Programming Information
Basic Hardware and Function
6F3B0250
109