Table of Contents
Advertisement
Central Remote Controller
Switch Operation Mode (CRC Mode Change Conf.)
NOTE
Central Control Mode: Use this unit as a Central Remote Controller.
By setting the "Key lock" on this unit, you can restrict the operation of the local remote controller.
Local Control Mode: Use this unit as a remote controller.
When "Key lock" is set by another Central Remote Controller, the operation of this unit is restricted in the
same way as the local remote controller.
While Local Control Mode is set,
Change the Indoor Unit Data (DN setting)
IMPORTANT
Only service personnel should perform this work.
Do not change this as it is related to the control of the device.
1
On the "Servicing Menu" screen, select "CRC Mode
Change Conf." then press [ ] (Confirm)
The "CRC Mode Change Conf." screen appears.
2
Press [˄] [˅] to select the mode, then press [ ]
(Confirm)
Press [
] (Return) to return to the "Servicing Menu" screen.
appears at the top of the clock and on each control screen.
Installation Manual
29
-EN
Advertisement
Table of Contents
