Toshiba BMS-CT2560U-E Owner's Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Controller
  5. BMS-CT2560U-E
  6. Owner's manual

Toshiba BMS-CT2560U-E Owner's Manual

Touch screen controller
Hide thumbs Also See for BMS-CT2560U-E:
Table of Contents

Advertisement

Quick Links

Touch Screen Controller
Model Name
BMS-CT2560U-E
(BMS-CT1280TU)
(BMS-CT2560U-TR)
● Thank you for purchasing this System Controller.
● In order to use this product safely and correctly, please read this owner's manual carefully before use and
make sure that you fully understand the contents.
In particular, please be sure to read the "Safety Precautions".
● After reading this manual, be sure to keep it in a place where the operator of the Unit can always view it.
Owner's Manual
Central Control Device
For commercial use

Advertisement

Table of Contents
loading

Related Manuals for Toshiba BMS-CT2560U-E

Summary of Contents for Toshiba BMS-CT2560U-E

  • Page 1 Central Control Device For commercial use Touch Screen Controller Model Name BMS-CT2560U-E (BMS-CT1280TU) (BMS-CT2560U-TR) ● Thank you for purchasing this System Controller. ● In order to use this product safely and correctly, please read this owner's manual carefully before use and make sure that you fully understand the contents.

  • Page 2: Table Of Contents

    Touch Screen Controller Owner's Manual Contents 1 Quick Start Guide ......... . . 6 2 Safety Precautions .
  • Page 3 Touch Screen Controller Owner's Manual 6 Basic Usage..........34 Start/Stop Operation .
  • Page 4 Touch Screen Controller Owner's Manual Auto mode ..............61 Night set back .
  • Page 5 Touch Screen Controller Owner's Manual Set the name of an indoor unit ..........91 Set the area name .

  • Page 6: Quick Start Guide

    Touch Screen Controller Owner's Manual Quick Start Guide Basic Usage To start/stop the air conditioner(s)  "Start/Stop Operation" (P.34) To change the set temperature  "Change the Air Conditioning Settings" (P.38) To change the Mode (Cool/Heat/Auto/Dry/Fan)  "Change the Air Conditioning Settings"...

  • Page 7: Safety Precautions

    WARNING Installation Precautions Ask the dealer from whom you purchased Use a designated TOSHIBA air conditioner. the unit or a professional for installation Please use a designated TOSHIBA air work. conditioner. Using products other than...
  • Page 8 Touch Screen Controller Owner's Manual CAUTION Installation Precautions Do not install in areas with high humidity or Do not install in direct sunlight or near heat vibration. sources. Doing so may cause a failure. Doing so may cause a failure. Check the Check the installation...

  • Page 9: Operating Method And Screen Structure

    Touch Screen Controller Owner's Manual Operating Method and Screen Structure Touch Panel Operation Method Explains the basic touch panel operation method. Drag Touch your finger lightly on the screen and release it Tap an object on the screen, hold your finger down, and immediately.

  • Page 10: Screen Structure

    Touch Screen Controller Owner's Manual Screen Structure The main screen structures used by this Unit are as follows. The screen can be switched by tapping (or flicking in some cases). ■ List screen ■ Layout screen ■ Batch ON/OFF screen ■...

  • Page 11: Before Usage

    Touch Screen Controller Owner's Manual Before Usage Air Conditioning System Configurations The system configurations that this Unit can control are as follows: Set all air conditioners at once. 256 groups, up to a total of 256 units Group 129 Group 1 Group 130 Group 2 Group 131...

  • Page 12: Glossary

    Touch Screen Controller Owner's Manual Glossary Terminology Description Thermo off When the temperature of a room reaches the set temperature, the outdoor unit compressor stops to switch from cooling/heating to fan operation. Although the indoor unit (air conditioner) is in operation, the outdoor unit repeatedly turns ON/OFF depending on the room temperature.

  • Page 13: Control Target Devices

    Touch Screen Controller Owner's Manual Control Target Devices In this Unit, the following devices can be controlled and monitored. Maximum number Names of equipment Equipment of units that can described in this manual be connected Multi air conditioners for buildings (Ceiling cassette, ceiling embedded, ceiling hanging, air to air heat exchanger with coil, etc.) Air conditioner...

  • Page 14: About The Main Screens

    Touch Screen Controller Owner's Manual About the Main Screens This section explains the home screen, list screen, layout screen, and the [CONTROL] tabs of the group screen and the individual control screen. ● NOTE Depending on the language settings and the theme settings, the screen languages and display colours differ. The screens shown in the manual use the "English"...
  • Page 15 Touch Screen Controller Owner's Manual Name (Icon) Functions Header area It is displayed even on screens other than the home screen. The operation content is common to each screen. Menu button ( Tap to display the menu. You can display various reports and detailed settings for the Unit. ●...
  • Page 16 Touch Screen Controller Owner's Manual Name (Icon) Functions Switch The air conditioner or ON/OFF unit switch registered in each group is displayed, and the name is displayed below the switch. Displays the operation status of the air conditioner(s). means operating state. The set temperature is displayed on the left and the operation mode is displayed on the right.

  • Page 17: List Screen

    Touch Screen Controller Owner's Manual List screen How to display the screen From the home screen, tap A pulldown menu appears. Tap [ -(1) The list screen appears. -(1) -(1)

  • Page 18: Screen Description

    Touch Screen Controller Owner's Manual Screen description Name (Icon) Functions Filter button Tap to display the unit selection screen. You can select the units to display on the unit selection screen. List title Displays the title of each list. Tap the title to sort the items in ascending order. Tap it again to sort the items in descending order.
  • Page 19 Touch Screen Controller Owner's Manual List of functions shown on the list screen List display function List display function DHW ON/OFF ON/OFF Auto mode Mode Frost protection Set temp. Anti bacteria Fan Speed Night set back Wind direction Hot water boost Control temp.

  • Page 20: Layout Screen

    Touch Screen Controller Owner's Manual Layout screen ● NOTE • This function is displayed only when the layout screen is registered. • For details on how to configure the layout screen, refer to the Operating Instructions of the Section Configuration Software. How to display the screen From the home screen, tap A pulldown menu appears.

  • Page 21: Screen Description

    Touch Screen Controller Owner's Manual Screen description ■ General layout screen ■ Detailed layout screen ■ Switch panel display ■ Group panel display Name (Icon) Functions Layer Group Name By swiping to the right or left in the Layer Group Name, you can change the selected layer.

  • Page 22: Group Control Screen ([Control] Tab)

    Touch Screen Controller Owner's Manual Group control screen ([CONTROL] tab) How to display the screen Scroll the home screen to display the group you want to change the settings for, then tap The [CONTROL] tab of the group screen is displayed.

  • Page 23: Screen Description

    Touch Screen Controller Owner's Manual Screen description -(1) -(1) -(2) -(2) -(3) -(3) Name (Icon) Functions Group name Displays the name of the currently displayed group. Tap to display the drop-down menu. You can switch the display to the individual control screen for another air conditioner or ON/OFF unit registered in the group.

  • Page 24: Individual Control Screen ([Control] Tab)

    Touch Screen Controller Owner's Manual Individual control screen ([CONTROL] tab) How to display the screen Scroll the home screen, display the air conditioner or ON/ OFF unit that you want to change the settings for, then tap the switch The [CONTROL] tab of the individual control screen is displayed.

  • Page 25: Screen Description

    Touch Screen Controller Owner's Manual Screen description -(1) -(1) -(2) -(2) -(3) -(3) Name (Icon) Functions Unit name The name of the air conditioner or ON/OFF unit currently displayed is shown. Tap to display the drop-down menu. You can switch the display to the group screen or another air conditioner or ON/OFF unit registered in the group.
  • Page 26 Touch Screen Controller Owner's Manual Name (Icon) Functions Remote-less Displays an icon for indoor units that have no local remote control. (LD) Refrigerant sensor life pre-notification This icon is displayed when the end of the operating life of the sensor in the connected leak detector (LD) is approaching.

  • Page 27: For The Air To Water Heat Pump (Atw)

    Touch Screen Controller Owner's Manual For the Air to Water Heat Pump (ATW) Name (Icon) Functions Air conditioning ON/OFF icon Tap to turn the air conditioning on or off. Operation mode You can change the air conditioner’s operation mode. You can only change between heating and cooling. ZONE1 Set temp.
  • Page 28 Touch Screen Controller Owner's Manual ● NOTE • For ON/OFF unit, only configurable items are displayed. Icons are displayed only when they are registered. (P.83) • If a malfunction occurs, an check code is displayed. Operation other than operation ON/OFF is not possible. •...

  • Page 29: Perform Initial Settings

    Touch Screen Controller Owner's Manual Perform Initial Settings CAUTION You cannot connect the Unit to the Internet. Never connect it. To connect to an external device, use a local area connection. Unit Settings Have service personnel perform the following work. Check the installation and wiring of the main unit Follow the installation instructions to complete the installation and wiring work.

  • Page 30: Settings For Remote Monitoring With A Pc

    Touch Screen Controller Owner's Manual Settings for Remote Monitoring with a PC You can monitor and control the Unit by accessing it from a PC. This section explains the settings for the Unit and the PC. Please see "9. Remote Monitoring Using a PC" (P.96) for the system diagram and the PC operating environment. ●...
  • Page 31 Touch Screen Controller Owner's Manual How to set the IP address of the PC Display the properties of the network to connect to the System Controller Check "Internet Protocol Version 4 (TCP / IPv4)" and click the [Properties] button Select "Use the following IP address", set IP address to 192.168.2.*** and Subnet mask to 255.255.255.0, and click the OK button * * For "***", enter an address different from that of the System Controller to...

  • Page 32: Install The Software

    Touch Screen Controller Owner's Manual Install the software Open the web browser of your PC Access "http://[server name or IP address]/touchscreencontroller/[language code]/ download.html" Server name or : Input the IP address that was set in "Set the IP address of the Touch Screen Controller" (P.87). IP address Language code: Enter the following value according to the language.

  • Page 33: Setting When Using Energy Report Software 2

    Touch Screen Controller Owner's Manual Setting when Using Energy Report Software 2 By using the Energy Report Software 2, you can display the operation status and operation history of the air conditioners aggregated by this Unit on a PC screen. You can also easily check and output reports (monthly report/daily report) for electric power distribution with a PC.

  • Page 34: Basic Usage

    Touch Screen Controller Owner's Manual Basic Usage This section explains the basic setting method for operation Start/Stop and air conditioning, the setting method for the operation schedule, and the confirmation method for the overall air conditioning system. Start/Stop Operation Overall air conditioning system operation method Tap [ -(1)] or [ -(2)]...
  • Page 35 Touch Screen Controller Owner's Manual * About selecting confirmation popups Control units: All General-purpose External device Air to Air Heat External device Air conditioner device control I/F Exchanger (DI/DO) Equipment in [ -(1)] Touch-screen Controller Air conditioning Air conditioning and hot water supply only Air to Water Heat Pump (ATW) Equipment in [...

  • Page 36: Group Unit Operation Method

    Touch Screen Controller Owner's Manual Group unit operation method Scroll the home screen to display the group you want to change the settings for, then tap Tap [ -(1)] or [ -(2)] -(1) -(1) -(2) -(2) Select the equipment to add to be operated, and then tap -(4)] All the air conditioners selected in the group and the selected equipment start or stop operations.

  • Page 37: Operation Method In Units Of Air Conditioner Or On/Off Unit

    Touch Screen Controller Owner's Manual Operation method in units of air conditioner or ON/OFF unit Scroll the home screen and display the air conditioner or ON/OFF unit that you want to change the settings for Drag or flick the of the corresponding switch Drag or flick to the right to start operation.

  • Page 38: Change The Air Conditioning Settings

    Touch Screen Controller Owner's Manual Change the Air Conditioning Settings Group unit operation method Scroll the home screen to display the group you want to change the settings for, then tap Tap [ -(1)] The batch settings screen is displayed. -(1) -(1) Change settings...
  • Page 39 Touch Screen Controller Owner's Manual Name Functions Wind direction to switch to the following. ● NOTE Depending on the connected model, it may not be configurable. Fan Speed to switch to the following. ● NOTE Depending on the connected model, it may not be configurable. Set temp.
  • Page 40 Touch Screen Controller Owner's Manual Select the equipment to add to be operated, and then tap -(4)] All the air conditioners selected in the group and the selected -(1) -(1) equipment start or stop operations. -(2) -(2) The selected equipment and air conditioners are added to -(3) -(3) equipment to be operated.

  • Page 41: Air Conditioner Unit Operation Method

    Touch Screen Controller Owner's Manual Air conditioner unit operation method ● NOTE To change the settings, it is necessary to set to the operation status. (P.37) Scroll the home screen, display the air conditioner you want to change the settings for, then tap the switch Change settings -(1) -(1)
  • Page 42 Touch Screen Controller Owner's Manual Name Functions Fan Speed Tap to switch to the following. ● NOTE Depending on the connected model, it may not be configurable. Set temp. to change the set temperature. ● NOTE • If the operation mode is FAN, the temperature cannot be set. •...

  • Page 43: Set The Operation Schedule

    Touch Screen Controller Owner's Manual Set the Operation Schedule You can configure the air conditioners or the ON/OFF unit with a “Weekly schedule”, through which settings such as operation start/stop are changed depending on the specified time for any day from Sunday to Saturday, or a “Special day schedule”, through which settings are changed for special days such as national holidays or special holidays.

  • Page 44: Individual Control Screen

    Touch Screen Controller Owner's Manual Individual control screen The schedule set for the air conditioner or ON/OFF unit being displayed is displayed on a 24-hour time scale. Functions You can switch the display in day-of-week units. Displays the setting screen of Special day schedule. Displays the setting screen of Weekly schedule.

  • Page 45: Create A New Weekly Schedule

    Touch Screen Controller Owner's Manual Create a new weekly schedule In a Weekly schedule, you can set: • Start time • Day(s) of the week • Air conditioner(s) or ON/OFF unit • ON/OFF Schedule settings can be applied from either the group screen or the individual control screen. In the following procedure, the individual control screen is used to explain.
  • Page 46 Touch Screen Controller Owner's Manual Select the day of the week to execute and tap [ -(1)] -(1) -(1) Select the air conditioner(s) or ON/OFF unit for setting the schedule and tap [ -(1)] You cannot select a model that has already been scheduled at the same time.

  • Page 47: Create A New Special Day Schedule

    Touch Screen Controller Owner's Manual Create a new special day schedule In a Special day schedule, you can register special days, such as national holidays and special holidays, to configure a special day schedule that differs from the Weekly schedule. Schedules can be configured from the group screen or the individual control screen.
  • Page 48 Touch Screen Controller Owner's Manual Tap or flick to set the start date, and then tap [ -(1)] -(1) -(1) Tap the check box of [ -(1)] and set it to , then select -(2)] or [ -(3)] and tap [ -(4)] You can only set [ON/OFF] here.

  • Page 49: Monitor The Overall Air Conditioning System

    Touch Screen Controller Owner's Manual Monitor the Overall Air Conditioning System To check the operation status of the overall air conditioning system, tap to display the batch ON/OFF screen. To check the malfunction occurrence status, tap to display the check code screen. ■...

  • Page 50: Various Functions

    Touch Screen Controller Owner's Manual Various Functions This section explains detailed settings on the [CONTROL] tab, how to change the schedule on the [SCHEDULE] tab, and how to check the power usage on the [GRAPH] tab. Local Remote Controller Lock You can restrict operation of the local remote controllers that belong to each air conditioner.
  • Page 51 Touch Screen Controller Owner's Manual ● NOTE When local remote control operation is prohibited, if there is a power failure, the local remote control prohibited status will be cancelled when the power returns. Ask service personnel if you want to continue the local remote control prohibited status after returning from a power failure. ●...

  • Page 52: Set Operation Details

    Touch Screen Controller Owner's Manual Set Operation Details You can check the current settings of the air conditioner(s) or ON/OFF unit, and set the details of the operation method. Display the [CONTROL] tab of the air conditioner(s) or ON/OFF unit whose setting you want to change (P.24) When changing in group units, display the batch settings screen (P.38) In the following procedure, the individual control screen is used to explain.

  • Page 53: Options For Air Conditioners

    Touch Screen Controller Owner's Manual To change, tap to display the settings screen, then tap [OK] after changing the settings For details on the confirmation/setting contents of each item, refer to the following. The items displayed depend on the model and state. Options for air conditioners Reference Function Name...

  • Page 54: Options For Air To Water Heat Pump (Atw)

    Touch Screen Controller Owner's Manual Options for Air to Water Heat Pump (ATW) Reference Function Name Overview Setting Items Page Auto mode Auto mode can be controlled. ON/OFF P.61 Night set back Night set back can be allowed. Enable/Disable P.61 Night operation setting Outdoor units can be set to low sound.

  • Page 55: Turn On/Off The Ventilation Function

    Touch Screen Controller Owner's Manual Turn ON/OFF the ventilation function You can turn ON/OFF the operation of the ventilator connected to the air to air heat exchanger(s) or air conditioner(s). ● NOTE Depending on the connected model, it may not be configurable. Set ventilation mode You can set the ventilation mode of the ventilator connected to the air to air heat exchanger(s) or the air conditioner(s).

  • Page 56: Check The Outdoor Temperature Detected By The Outdoor Unit

    Touch Screen Controller Owner's Manual Check the outdoor temperature detected by the outdoor unit You can check the outdoor temperature detected by the outdoor unit. ● NOTE • Depending on the connected model, it may not be displayed. • Depending on conditions such as the location of the outdoor unit installation, it may differ from the actual outdoor temperature.

  • Page 57: Control Air Conditioner Power

    Touch Screen Controller Owner's Manual Control air conditioner power An energy saving function whereby you can operate the air conditioner with suppressed cooling/heating power. Release (100%): Save Mode is not performed. Max.(50 - 100%): Operate with the highest save rate. Operate at 50% save rate.

  • Page 58: Change To Energy Saving Temperature

    Touch Screen Controller Owner's Manual Change to energy saving temperature An energy saving function that changes (shifts) the set temperature according to the current operation mode as follows. Operation Mode Set Temperature Shift Width Cool/Dry Current set temperature +2°C shift Heat Current set temperature -2°C shift Auto/Fan...

  • Page 59: Set The Temperature Change Range

    Touch Screen Controller Owner's Manual Set the temperature change range You can set the set temperature range for each operation mode. ● NOTE • Depending on the connected model, it may not be displayed. • If the current set temperature of the air conditioner is outside of the set temperature range after the change, it will be changed to the temperature within the range after the change.

  • Page 60: Power Select

    Touch Screen Controller Owner's Manual Power Select This function monitors and controls Power select operation of targeted equipment. While being controlled, is displayed to the right of the unit name. ● NOTE May not be displayed, depending on the model connected. PURE This function monitors and controls PURE operation of targeted equipment.

  • Page 61: Unit Information

    Touch Screen Controller Owner's Manual Unit information Displays the model name and production number. ● NOTE May not be displayed, depending on the model connected. Auto mode This function monitors and controls Auto mode. By setting Auto mode to [Enable], |A| is displayed where the temperature setting is displayed, and the temperature setting cannot be changed.

  • Page 62: Anti Bacteria

    Touch Screen Controller Owner's Manual Anti bacteria Monitors and controls Anti bacteria operation. While being controlled, is displayed to the right of the unit name. The actual operation depends on the time at the local remote control. For details, refer to the owner’s manual for the local remote control. ●...

  • Page 63: Change The Operating Schedule

    Touch Screen Controller Owner's Manual Change the Operating Schedule The operating schedule settings can be changed from the [Menu] button, the group screen, or the individual control screen. There are two types of operating schedules: Weekly schedule and Special day schedule. The following procedure is explained using the individual control screen.
  • Page 64 Touch Screen Controller Owner's Manual Scroll the screen and tap the value of the item you want to set. After changing the setting, tap [OK] See "Setting items list" (P.67) for the items that can be configured.

  • Page 65: Change The Details Of The Special Day Schedule

    Touch Screen Controller Owner's Manual Change the details of the special day schedule Tap [ -(1)] on the group screen or the individual control screen -(1) -(1) Tap [ -(1)] -(1) -(1) Tap [ -(1)] of the schedule you want to modify •...
  • Page 66 Touch Screen Controller Owner's Manual Tap [ -(1)] of the time you want to modify -(1) -(1) Scroll the screen and tap the value of the item you want to set. After changing the setting, tap [OK] See "Setting items list" (P.67) for the items that can be configured.

  • Page 67: Setting Items List

    Touch Screen Controller Owner's Manual Setting items list Setting Items Setting Procedure Time setting [Start date] Tap or flick to change the time. Day of the week setting [week] Set the check box(es) of the day(s) of the week on which you want to execute the schedule ●...
  • Page 68 Touch Screen Controller Owner's Manual Setting Items Setting Procedure Local operation prohibition setting Tap the check box of the function whose setting you want to change to set it to , then [Lock setting of remote control] select [(1)] or [(2)]. Night operation setting You can change the [ON/OFF] of the night operation of the target device.
  • Page 69 Touch Screen Controller Owner's Manual Setting Items Setting Procedure DHW ON/OFF This setting item is specifically for the Air to Water Heat Pump (ATW) in the hot water [DHW ON/OFF] supply function. To enable this setting, select for the [Enable] check box, and then select [ON, OFF]. ●...

  • Page 70: Delete The Operation Schedule

    Touch Screen Controller Owner's Manual Delete the operation schedule You can delete the schedule from either the group screen or the individual control screen. In the following procedure, the individual control screen is used. Tap [ -(1)] on the group screen or individual control screen -(1) -(1)

  • Page 71: Confirm The Operation Time

    Touch Screen Controller Owner's Manual Confirm the Operation Time In the [GRAPH] tab of the group screen or individual control screen, you can check the operation time for each group, air conditioner or ON/OFF unit. Tap [ -(1)] on the group screen or individual control screen The operation graph appears.

  • Page 72: Display The Owner's Manual On The Screen

    Touch Screen Controller Owner's Manual Display the Owner's Manual on the Screen You can browse the owner's manual on the screen. How to display the owner's manual -(1) -(1) -(1) ] appears. Tap [ -(1)] -(1) -(1) Select the display language The owner's manual is displayed.

  • Page 73: Administrator Menu

    Touch Screen Controller Owner's Manual Administrator Menu Confirm Check Code History You can display failures that have occurred in a list, including currently occurring ones. This can be used for grasping the status of the site such as investigating the cause of a failure and the recovery status. ●...

  • Page 74: Confirm The Power Consumption On A Graph

    Touch Screen Controller Owner's Manual Confirm the Power Consumption on a Graph Pulse values are graphed and the electric power can be visually confirmed. * This function can be displayed when the electric power is measured by connecting this Unit to a pulse transmission type watt hour meter.

  • Page 75: Restrict Operation Of The Touch Screen Controller

    Touch Screen Controller Owner's Manual Restrict Operation of the Touch Screen Controller You can restrict the operation range of the Unit by locking it. This section explains how to set and release the lock. For the restriction range, see "Set the operation lock level" (P.86). -(1) -(1) -(1)] appears.

  • Page 76: [Functions] Menu Settings

    Touch Screen Controller Owner's Manual [Functions] Menu Settings On the [Functions] menu, demand control of outdoor units and summation of data for power distribution can be performed. How to display the [Functions] menu -(1) -(1) -(1)] appears. Tap [ -(1)] -(1)] appears.

  • Page 77: Set Demand Control Schedule Of Outdoor Unit

    Touch Screen Controller Owner's Manual Set demand control schedule of outdoor unit The demand function of the outdoor unit can be managed with the schedule to 100% to 0% according to the peak time zone. Setting example: If you set "80%" for 9:00 to 18:00, "90%"...
  • Page 78 Touch Screen Controller Owner's Manual Tap or flick to set the start time and tap [ -(1)] -(1) -(1) Select the outdoor demand level and tap [ -(1)] to add a demand schedule -(1) -(1) To add a schedule such as change/release of demand level, repeat steps ●...

  • Page 79: Delete An Power Peak Cut Schedule

    Touch Screen Controller Owner's Manual Delete an power peak cut schedule Tap [ -(2)] with [ -(1)] (P.76) -(1) -(1) -(2) -(2) Set the check box of the schedule you want to delete to -(1) -(1) then tap [ -(1)] The selected schedule will be deleted.

  • Page 80: Output Data To A Usb Memory Stick

    Touch Screen Controller Owner's Manual Output data to a USB memory stick You can output data for Energy Report Software 2 to a USB memory stick. Connect the USB memory stick to the slot in the Unit Tap [Output to USB memory] in the [Functions] menu (P.76) Tap [OK] ●...

  • Page 81: [Initial Setting] Menu Settings

    Touch Screen Controller Owner's Manual [Initial setting] Menu Settings On the [Initial setting] menu, you can change the Unit screen display and the settings for remote operation, etc. How to display the [Initial setting] menu -(1) -(1) -(1)] appears. Scroll through the menu list and tap [ -(1)] -(1)] appears.

  • Page 82: Set The Screen Display

    Touch Screen Controller Owner's Manual Set the screen display You can change the display settings of the screen, such as language and date display format. Tap [ -(2)] with [ -(1)] (P.81) Tap the item you want to change (1) Language: You can change the display language of the screen.

  • Page 83: Set Icons Of Devices Other Than Air Conditioners

    Touch Screen Controller Owner's Manual Set icons of devices other than air conditioners You can display icons of each device on the [CONTROL] tab of devices other than air conditioners such as ventilation fan or lighting. Tap [ -(2)] with [ -(1)] (P.81) -(2) -(2)

  • Page 84: Set An Account For Remote Operation

    Touch Screen Controller Owner's Manual Set an account for remote operation You can set a user account to operate the Unit remotely. * Remote operation can be used when the Unit is connected via LAN to a PC on which the Remote Control Software is installed.

  • Page 85: Delete A User Account

    Touch Screen Controller Owner's Manual Set level Administrators : All functions can be used. Power Users : The following functions cannot be used. • Confirm/change the operation schedule • [Menu] > Functions • [Menu] > Initial setting Guests : Only the operation status can be confirmed. The settings cannot be changed. ●...

  • Page 86: Set The Operation Lock Level

    Touch Screen Controller Owner's Manual Set the operation lock level Tap [ -(2)] with [ -(1)] (P.81) -(2) -(2) -(1) -(1) Enter the password and tap [ -(1)] ● NOTE The factory default setting password is "1048". -(1) -(1) Select the protection level during lock ●...

  • Page 87: Set The Ip Address Of The Touch Screen Controller

    Touch Screen Controller Owner's Manual Set the IP address of the Touch Screen Controller Tap [ -(2)] with [ -(1)] (P.81) -(2) -(2) Tap the value you want to change The characters of the selected item change to red. Tap the numeric keypad to enter a number If there are other values you want to change, repeat steps -(1) -(1)

  • Page 88: Set Check Code Email Destination

    Touch Screen Controller Owner's Manual Set check code email destination You can set the email address to send email to when an error occurs. ● NOTE Up to five email addresses can be set. Tap [ -(2)] with [ -(1)] (P.81) -(1) -(1) Tap the address field to register...

  • Page 89: -En Change The Area Set For An Indoor Unit

    Touch Screen Controller Owner's Manual Change the area set for an indoor unit In [Indoor unit area setting], you can move the indoor unit A in area X to area Y. ● NOTE • All areas. The area numbers, such as area 1 and area 2, are allocated automatically in the upper section of the home screen.
  • Page 90 Touch Screen Controller Owner's Manual Tap [ -(1)] -(1) -(1) The indoor unit (unit 001) is moved to area 2.

  • Page 91: Set The Name Of An Indoor Unit

    Touch Screen Controller Owner's Manual Set the name of an indoor unit Tap [ -(2)] in [ -(1)] (P.81) -(2) -(2) Tap the name you want to change in the list -(1) A keyboard is displayed. Enter the name and then tap [ -(1) -(1) -(1)

  • Page 92: Set The Screen Brightness

    Touch Screen Controller Owner's Manual Set the screen brightness You can set the brightness of the screen and the duration after the end of the operation. In (1, 3, 10, 30, 60, 360 (6 hours), 720 (12 hours) minutes) Tap [ -(2)] with [ -(1)] (P.81) -(1)
  • Page 93 Touch Screen Controller Owner's Manual Set Energy threshold In [ -(1)], tap [ -(2)] -(1) -(1) -(2) -(2) Tap [ -(1)] -(1) -(1) Tap [ -(1)] and set the pulse constant for each of channels 1 to 8 ● NOTE -(1) -(1) •...
  • Page 94 Touch Screen Controller Owner's Manual Tap [ -(1)] -(1) -(1) Set the controls to execute if the thresholds that are set in step are exceeded -(1) -(1) -(2) -(2) • [ -(1)] Outdoor unit selection: Select a target outdoor unit •...
  • Page 95 Touch Screen Controller Owner's Manual Set Peak cut signal reception In [ -(1)], tap [ -(2)] -(1) -(1) -(2) -(2) Tap [ -(1)] -(1) -(1) Enter the power peak cut control to execute when the power peak cut signal is entered -(2) -(2) -(1)

  • Page 96: Remote Monitoring Using A Pc

    Touch Screen Controller Owner's Manual Remote Monitoring Using a PC You can monitor and control the Unit by accessing it from a PC. This section explains the system diagram and the operating environment. For settings, etc., see "Settings for Remote Monitoring with a PC" (P.30). ●...

  • Page 97: Exit Remote Control Software

    Touch Screen Controller Owner's Manual Click [ -(1)] -(1) -(1) Click [ -(1)] You are logged out from the Remote Control Software. -(1) -(1) Exit Remote Control Software Tap [ -(1)] -(1) -(1) Tap [ -(1)] Exit the Remote Control Software. -(1) -(1)

  • Page 98: Power Distribution

    Touch Screen Controller Owner's Manual Power Distribution Power Distribution System Using the Energy Report Software 2 (PC Software) In normal houses, a contract is made with the electric power company for each house, but in buildings such as offices and shops, a contract is made between the building owner and the electric power company, and the building owner pays the total electricity bill.

  • Page 99: How To Use The Power Distribution System

    Touch Screen Controller Owner's Manual How to use the power distribution system Download the data for power distribution Save the data for power distribution to the PC using one of the following procedures. 1) Download by LAN connection Download the data using the Energy Report Software 2. 2) Copy the data to a USB memory stick Output the data to the USB memory stick using the Unit's [Output to USB memory] and import the data using the Energy Report Software 2.

  • Page 100: Troubleshooting

    Touch Screen Controller Owner's Manual Troubleshooting Phenomenon Question Confirmation items The LCD does not display. Is the power turned on? Check that the power is not turned off by the breaker or the like. There is a green LED at the lower rear of the main unit and a green LED on the AC adapter that indicate that power is being supplied.
  • Page 101 Touch Screen Controller Owner's Manual Phenomenon Question Confirmation items The LCD does not turn off. Has a check code been detected? The LCD will still be on when a check code has been detected. Erase the check code. Sometimes the LCD becomes The LCD's antistatic control is Temporarily stop the LCD periodically to prevent LCD burn-in.
  • Page 102 Software. the Remote Control Software storage Carrier Corporation). location? Right-click on the TOSHIBA Carrier Corporation folder, select the [Properties] - [Security] Name, click the "Edit" button and check [Allow] for [Full control] under different settings. The schedule setting changes Are you trying to change the schedule To change the schedule settings, please set only one of either the have not been reflected.

  • Page 103: Useful Information

    Touch Screen Controller Owner's Manual Useful Information The following cases are not faults with the Unit. Problem Cause When an air conditioner is stopped, its This is because even when an air conditioner is stopped, you can set its operation from the operation status is displayed on the LCD Touch Screen Controller.

  • Page 104: Appendix

    Touch Screen Controller Owner's Manual Appendix Specifications Detailed specifications Power supply 220-240 V AC 50/60 Hz Consumed current 1.17 A Operating temperature/ 0°C to 40°C, 10% to 90% RH (no dew condensation) humidity range Dimensions (mm) H136×W205×D10(+80) (Embedded dimensions shown in parenthesis) 1.34 kg (Touch Screen Controller) Mass 0.45 kg (power adapter)

  • Page 105: Function List

    Touch Screen Controller Owner's Manual Function list Key Features Key Features Main unit 8 inputs ON/OFF Inputs DIO interface 8 inputs x 4 units Mode Power pulse measurement Set temp. Demand Interlocking Fan speed Fire Alarm Interlocking Wind direction Locking Interlocking External input Lock setting of remote control Stop Interlocking...

  • Page 106: List By Lock Level/Level

    Touch Screen Controller Owner's Manual List by Lock Level/Level Refer to the following table for the functional differences depending on the operation of the main Unit and remote operation, the level of the operation lock of the main Unit and the level of the user account. (: Full functional operation : Partially restricted ‒: Cannot be used) Unit Operation Remote Operation...
  • Page 107 Touch Screen Controller Owner's Manual Unit Operation Remote Operation Operation Operation Operation Item Admini Power Lock Lock Lock Guests strators Users None - Level 1 - Level 2 Menu Schedule [Weekly] tab  ‒ ‒  ‒ ‒ [Special day] tab ...

  • Page 108: Warranty And After-Sales Service

    Touch Screen Controller Owner's Manual Warranty and After-Sales Service About the Warranty • The warranty period is one year from date of purchase. About After-Sales Service • Please check "11. Troubleshooting" (P.100) before requesting a repair. If this does not solve the problem, immediately shut off the power supply and contact us.

  • Page 109: Oss License

    Touch Screen Controller Owner's Manual OSS License This product contains licensed software or software whose copyright is owned by a third party according to the following.
  • Page 110 Touch Screen Controller Owner's Manual...
  • Page 111 Touch Screen Controller Owner's Manual...
  • Page 112 Touch Screen Controller Owner's Manual...
  • Page 113 Customer Memo Model Name BMS-CT2560U-E / BMS-CT2560U-TR Installation Date Year Month Name of dealer from whom you purchased the unit Phone number It is convenient to fill this in at the time of purchase in case you need to request repair, etc.

This manual is also suitable for:

Bms-ct1280tuBms-ct2560u-tr

Table of Contents