Toshiba PROSEC T1 User Manual page 37

Data link mode
Two PLCs (any combination of T1S, T2E or T2N) can be directly linked together. This
direct link is inexpensive, easily configured and requires no special programming. Data
registers D0000 to D0031 are used for the data transfer.
Station No. 1
Free ASCII mode
User defined ASCII messages can be transmitted and received through this port.
A terminal, printer, bar-code reader, or other serial ASCII device can be directly
connected. This mode also allows the T1S to communicate with other PLCs (T1, T2E,
T2N, etc.), Toshiba's Inverters (such as VF-S7/A5, G3), Toshiba's motor protection
relay (S2E21), or others.
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
T1S
T1
D0000
D0015
D0016
D0031
T1S
T1
Bar-code reader,
Printer, etc.
1. System Configuration
RS-485 (1 km max.)
RS-485 (1 km max.)
T1
T1
Inverter VF-S7
Basic Hardware and Function
6F3B0250
T1S
T1
Station No. 2
D0000
D0015
D0016
D0031
Motor Protection Relay
S2E21
35