Toshiba PROSEC T1 User Manual page 40

1. System Configuration
T-Series Handy Programmer (HP911A)
The HP911A is a hand-held programmer, that can be used to program the T1/T1S
using ladder diagram. Its portability makes it ideal for maintenance use at remote
locations.
The HP911A has the following features.
· The HP911A supports ladder diagram programming of T-Series programmable
controllers T1/T1S, T2/T2E/T2N and T3.
· Built-in EEPROM allows program copy between T-Series controllers.
· Two display modes are available,
- Normal: 5 lines and 12 columns
- Zoom: Full device description
· On-line data set and I/O force are useful for system checking.
· Backlit LCD display allows operation in dim light.
There are two types of the Handy Programmer (HP911) depending on the cable
included with.
Type
HP911A
HP911
The T1S can be used with the HP911(A). However, there are the following functional
limitations.
· The program size setting is only available as 2 k. It is set to 4 k mode in the T1S.
· Some of the added instructions (MAVE, DFL, HTOA, ATOH) cannot be
edited/monitored.
NOTE
38
T1/T1S User's Manual
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Part number Cable included with
2 m cable for T1/T1S
THP911A*S
2 m cable for the upper
THP911**S
T-series PLCs
A 2 m connection cable for the T1/T1S (Type: CJ102) is supplied with the
HP911A. The cable for the T2/T3 is available separately. (Type: CJ902, 2 m
length)
Versions available for T1/T1S
Ver 1.1 or later
Ver 1.1 or later
6F3B0250