Toshiba PROSEC T1 User Manual page 283

Sample program
Main program
I/O interrupt program #3
I/O interrupt program #4
In this example, 12357 (H3045) is set in SW16. As a result, the interrupt input function (2
points, rising for both) is selected.
When X002 is changed from OFF to ON, the interrupt program A is executed. When
X003 is changed from OFF to ON, the interrupt program B is executed.
NOTE
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
(H3045)
Interrupt program A
Interrupt program B
Even if the Direct I/O instruction is used in the interrupt program, the
corresponding input state (X002 or X003) cannot be confirmed. Because the
interrupt is generated before internal updating of the input states.
8. Special I/O Functions
Basic Hardware and Function
281