Timer Realtime-Accounting (Radius Scheme View) - HP FlexFabric 7900 Series Command Reference Manual

Use undo timer quiet to restore the default.
Syntax
timer quiet minutes
undo timer quiet
Default
The server quiet period is 5 minutes.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
minutes: Specifies the server quiet period in minutes, in the range of 1 to 255.
Usage guidelines
Make sure the server quiet timer is set correctly.
A timer that is too short might result in frequent authentication or accounting failures because the
•
device will continue to attempt to communicate with an unreachable server that is in active state.
A timer that is too long might temporarily block a reachable server that has recovered from a failure,
•
because the server will remain in blocked state until the timer expires.
Examples
# Set the quiet timer for the servers to 10 minutes.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] timer quiet 10
Related commands
display radius scheme

timer realtime-accounting (RADIUS scheme view)

Use timer realtime-accounting to set the real-time accounting interval.
Use undo timer realtime-accounting to restore the default.
Syntax
timer realtime-accounting minutes
undo timer realtime-accounting
Default
The real-time accounting interval is 12 minutes.
Views
RADIUS scheme view
Predefined user roles
network-admin
49