Display Radius Scheme - HP FlexFabric 7900 Series Command Reference Manual

Examples
# In RADIUS scheme radius1, set the data flow and packet measurement units for traffic statistics to
kilobyte and kilo-packet, respectively.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] data-flow-format data kilo-byte packet kilo-packet
Related commands

display radius scheme

display radius scheme
Use display radius scheme to display the configuration of RADIUS schemes.
Syntax
display radius scheme [ radius-scheme-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of 1 to 32
characters.
Usage guidelines
If no RADIUS scheme is specified, the command displays the configuration of all RADIUS schemes.
Examples
# Display the configuration of all RADIUS schemes.
<Sysname> display radius scheme
Total 1 RADIUS schemes
------------------------------------------------------------------
RADIUS Scheme Name
Index : 0
Primary Auth Server:
IP : 2.2.2.2
Primary Acct Server:
IP: 1.1.1.1
Second Auth Server:
IP: Not configured
Second Acct Server:
IP: Not configured
Security Policy Server:
Server: 0
Server: 1
: radius1
IP: 2.2.2.2
IP: 3.3.3.3
Port: 1812
Port: 1813
Port: 1812
Port: 1813
30
State: Active
State: Active
State: Block
State: Block