Ip Addressing Configuration Commands; Display Ip Interface - HP 6125G Command Reference Manual

IP addressing configuration commands

display ip interface

Syntax
display ip interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ip interface to display IP configuration information for a specified Layer 3 interface or all
Layer 3 interfaces.
Examples
# Display IP configuration information for interface VLAN-interface 1.
<Sysname> display ip interface vlan-interface 1
Vlan-interface1 current state :DOWN
Line protocol current state :DOWN
Internet Address is 1.1.1.1/8 Primary
Broadcast address : 1.255.255.255
The Maximum Transmit Unit : 1500 bytes
input packets : 0, bytes : 0, multicasts : 0
output packets : 0, bytes : 0, multicasts : 0
ARP packet input number:
Request packet:
Reply packet:
Unknown packet:
TTL invalid packet number:
ICMP packet input number:
Echo reply:
Unreachable:
0
0
0
0
0
0
0
0
17