Display Ip Host - HP 6125G Command Reference Manual

Table 15 Command output
Field
DNS Server
Type
IP Address

display ip host

Syntax
display ip host [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ip host to display the host names and corresponding IPv4 addresses in the static domain
name resolution table.
Examples
# Display the host names and corresponding IPv4 addresses in the static domain name resolution table.
<Sysname> display ip host
Host
My
Aa
Table 16 Command output
Field
Host
Age
Description
Sequence number of the DNS server, configured automatically by the device,
starting from 1.
Type of domain name server: S represents a statically configured DNS server, and
D represents a DNS server obtained dynamically through DHCP.
IPv4 address of the DNS server.
Age Flags
0 static
0 static
Description
Host name.
Time to live. 0 means that the static mapping will never age out.
You can only manually remove the static mappings between host names and IPv4
addresses.
Address
1.1.1.1
2.2.2.4
71