Local-Proxy-Arp Enable - HP 6125G Command Reference Manual

Default level
2: System level
Parameters
interface interface-type interface-number: Displays the proxy ARP status of the interface specified by the
argument interface-type interface-number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display proxy-arp to display the proxy ARP status.
If an interface is specified, the proxy ARP status of the specified interface is displayed; if no interface is
specified, the proxy ARP status of all interfaces is displayed.
Related commands: proxy-arp enable.
Examples
# Display the proxy ARP status on VLAN-interface 1.
<Sysname> display proxy-arp interface Vlan-interface 1
Interface Vlan-interface 1
Proxy ARP status: disabled

local-proxy-arp enable

Syntax
local-proxy-arp enable [ ip-range startIP to endIP ]
undo local-proxy-arp enable
View
VLAN interface view
Default level
2: System level
Parameters
ip-range startIP to endIP: Specifies the IP address range for which local proxy ARP is enabled. The start
IP address must be lower than or equal to the end IP address.
Description
Use local-proxy-arp enable to enable local proxy ARP.
Use undo local-proxy-arp enable to disable local proxy ARP.
By default, local proxy ARP is disabled.
Only one IP address range can be specified by using the ip-range keyword on an interface.
13