Display Ipv6 Dhcp Client Statistics - HP 6125G Command Reference Manual

Description
Use display ipv6 dhcp client to display DHCPv6 client information.
With no parameters specified, the DHCPv6 client information of all the interfaces is displayed.
Examples
# Display the DHCPv6 client information of VLAN-interface 2.
<Sysname> display ipv6 dhcp client interface vlan-interface 2
Vlan-interface2 is in stateless DHCPv6 client mode
State is OPEN
Preferred Server:
Reachable via address
DUID
DNS servers
Domain names
Table 36 Command output
Field
in stateless DHCPv6 client
mode
State is OPEN
Preferred Server
Reachable via address
DUID
DNS servers
Domain names

display ipv6 dhcp client statistics

Syntax
display ipv6 dhcp client statistics [ interface interface-type interface-number ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
: FE80::213:7FFF:FEF6:C818
: 0003000100137ff6c818
: 1:2:3::5
1:2:4::7
: abc.com
Description
Indicates the client is in the stateless DHCPv6 configuration mode.
Current state of the DHCPv6 client:
•
INIT—After enabled, the DHCPv6 client enters the INIT state.
•
IDLE—After receiving an RA message with the "M" flag set to 0 and "O" flag
set to 1 and enabled with stateless DHCPv6, the DHCPv6 client enters the
IDLE state.
•
INFO-REQUESTING—The DHCPv6 client is requesting configuration
information.
•
OPEN—The DHCPv6 client successfully obtained configuration parameters
and completed stateless configuration based on the obtained parameters.
Information about the DHCPv6 server selected by the DHCPv6 client.
Reachable address, which is the link local address of the DHCPv6 server or relay
agent.
DHCP unique identifier (DUID) of the DHCPv6 server.
DNS server address sent by the DHCPv6 server.
Domain name information sent by the DHCPv6 server.
149