HP 6125G Command Reference Manual page 55

Default level
2: System level
Parameters
client-identifier mac interface-type interface-number: Enables an interface to use its MAC address as the
client ID to obtain an IP address.
Description
Use ip address dhcp-alloc to configure an interface to use DHCP for IP address acquisition.
Use undo ip address dhcp-alloc to cancel an interface from using DHCP.
By default, an interface does not use DHCP for IP address acquisition.
If no parameter is specified, the client uses a character string that comprises the current interface name
and MAC address as its ID for address acquisition.
The DHCP client sends a DHCP-RELEASE message for releasing the IP address obtained through DHCP.
Examples
# Configure VLAN-interface 1 to use DHCP for IP address acquisition.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] ip address dhcp-alloc
48