Display Dhcp-Snooping Packet Statistics - HP 6125G Command Reference Manual

Status: Disable
Strategy: Keep
Format: Normal
Circuit ID format-type: HEX
Remote ID format-type: ASCII
User defined:
Circuit ID: company001
Remote ID: device001
VLAN 10:
VLAN 20:

display dhcp-snooping packet statistics

Syntax
display dhcp-snooping packet statistics [ slot slot-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
slot slot-number: Displays the DHCP packet statistics of a specified IRF member switch. The slot-number
argument specifies the ID of the IRF member switch. The value range for the argument depends on the
number of member switches and their member IDs in the IRF fabric, which you can display with the
display irf command. On a standalone device, the slot-number argument specifies the ID of the device.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters
Description
Use display dhcp-snooping packet statistics to display DHCP packet statistics on the DHCP snooping
device.
Related commands: reset dhcp-snooping packet statistics.
Examples
# Display DHCP packet statistics on the DHCP snooping device.
<Sysname> display dhcp-snooping packet statistics
Circuit ID: vlan10@company001
Sub-option 9: Enable
Sub-option 9 content: group1
Remote ID: device001
Sub-option 9: Enabled
63