Ip Address Unnumbered - HP 6125G Command Reference Manual

Layer 3 - ip services command reference
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

ip address unnumbered

Syntax
ip address unnumbered interface interface-type interface-number
undo ip address unnumbered
View
Interface view
Default level
2: System level
Parameters
interface interface-type interface-number: Specifies an interface from which the current interface can
borrow an IP address.
Description
Use ip address unnumbered to configure the current interface as IP unnumbered to borrow an IP address
from another interface.
Use undo ip address unnumbered to disable IP unnumbered on the interface.
By default, the interface does not borrow IP addresses from other interfaces.
Examples
# Configure the interface tunnel 1 to borrow the IP address of the interface VLAN-interface 100.
<Sysname> system-view
[Sysname] interface Tunnel 1
[Sysname-Tunnel1] ip address unnumbered interface vlan-interface 100
22

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents