Display Interface Tunnel - HP 6125G Command Reference Manual

<Sysname1> system-view
[Sysname1] interface tunnel 0
[Sysname1-Tunnel0] source 193.101.1.1
[Sysname1-Tunnel0] destination 192.100.1.1
<Sysname2> system-view
[Sysname2] interface tunnel 1
[Sysname2-Tunnel1] source 192.100.1.1
[Sysname2-Tunnel1] destination 193.101.1.1

display interface tunnel

Syntax
display interface [ tunnel ] [ brief [ down ] ] [ | { begin | exclude | include } regular-expression ]
display interface tunnel number [ brief ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
number: Specifies the number of a tunnel interface. With this argument, the command displays
information about the specified tunnel interface.
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
down: Displays information about interfaces in the DOWN state and the causes. If you do not specify
this keyword, this command displays information about interfaces in all states.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display interface tunnel to display information about tunnel interfaces, such as the source address,
destination address, and tunnel mode.
If you do not specify the tunnel keyword, this command displays information about all interfaces on
•
the device.
• If you specify the tunnel keyword without the number argument, this command displays information
about all existing tunnel interfaces.
Related commands: interface tunnel, source, destination, and tunnel-protocol.
Examples
# Display detailed information about interface Tunnel 0.
<Sysname> display interface tunnel 0
155