Ipv6 Pathmtu Age; Ipv6 Unreachables Enable - HP 6125G Command Reference Manual

Description
Use ipv6 pathmtu to configure a static path MTU for a specified IPv6 address.
Use undo ipv6 pathmtu to remove the path MTU configuration for a specified IPv6 address.
By default, no static path MTU is configured.
Examples
# Configure a static path MTU for a specified IPv6 address.
<Sysname> system-view
[Sysname] ipv6 pathmtu fe80::12 1300

ipv6 pathmtu age

Syntax
ipv6 pathmtu age age-time
undo ipv6 pathmtu age
View
System view
Default level
2: System level
Parameters
age-time: Specifies the aging time for path MTU in minutes, in the range of 10 to 100.
Description
Use ipv6 pathmtu age to configure the aging time for a dynamic path MTU.
Use undo ipv6 pathmtu age to restore the default.
By default, the aging time is 10 minutes.
The aging time is invalid for a static path MTU.
Related commands: display ipv6 pathmtu.
Examples
# Set the aging time for a dynamic path MTU to 40 minutes.
<Sysname> system-view
[Sysname] ipv6 pathmtu age 40

ipv6 unreachables enable

Syntax
ipv6 unreachables enable
undo ipv6 unreachables
View
System view
137