Display Dhcp-Snooping Trust; Reset Dhcp-Snooping - HP 6125G Command Reference Manual

DHCP packets received
DHCP packets sent
Packets dropped due to rate limitation : 20
Dropped invalid packets

display dhcp-snooping trust

Syntax
display dhcp-snooping trust [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display dhcp-snooping trust to display information about trusted ports.
Related commands: dhcp-snooping trust.
Examples
# Display information about trusted ports.
<Sysname> display dhcp-snooping trust
DHCP Snooping is enabled.
DHCP Snooping trust becomes active.
Interface
=========================
GigabitEthernet1/0/1
The above output shows that DHCP snooping is enabled, DHCP snooping trust is active, and port
GigabitEthernet 1/0/1 is trusted.

reset dhcp-snooping

Syntax
reset dhcp-snooping { all | ip ip-address }
View
User view
: 100
: 200
: 0
Trusted
============
Trusted
64