Display Dhcp-Snooping Information - HP 6125G Command Reference Manual

Field
Latest write time
Status

display dhcp-snooping information

Syntax
display dhcp-snooping information { all | interface interface-type interface-number } [ | { begin |
exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all: Displays the Option 82 configuration information of all Layer 2 Ethernet ports.
interface interface-type interface-number: Displays the Option 82 configuration information of a
specified interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display dhcp-snooping information to display Option 82 configuration information on the DHCP
snooping device.
Examples
# Display the Option 82 configuration information of all interfaces.
<Sysname> display dhcp-snooping information all
Interface: GigabitEthernet 1/0/1
Status: Enable
Strategy: Replace
Format: Verbose
Circuit ID format-type: HEX
Remote ID format-type: ASCII
Node identifier: aabbcc
Sub-option 9: Enabled
User defined:
Circuit ID: company001
Sub-option 9 content: group1
Interface: GigabitEthernet 1/0/2
Description
Last time when the file is written.
Indicates whether the file was written successfully last time.
62