Dhcp-Snooping Information Sub-Option - HP 6125G Command Reference Manual

replace: Forwards the message containing Option 82 after replacing the original Option 82 with the one
padded in specified format.
Description
Use dhcp-snooping information strategy to configure the handling strategy for Option 82 in requesting
messages.
Use undo dhcp-snooping information strategy to restore the default.
By default, the handling strategy for Option 82 in requesting messages is replace.
Related commands: display dhcp-snooping information, dhcp-snooping information format and

dhcp-snooping information sub-option.

Examples
# Configure the handling strategy for Option 82 in requesting messages as keep.
<Sysname> system-view
[Sysname] interface GigabitEthernet1/0/1
[Sysname-GigabitEthernet1/0/1] dhcp-snooping information enable
[Sysname-GigabitEthernet1/0/1] dhcp-snooping information strategy keep
dhcp-snooping information sub-option
Syntax
dhcp-snooping information [ vlan vlan-id ] sub-option sub-option-code [ string user-string&<1-8> ]
undo dhcp-snooping information [ vlan vlan-id ] sub-option sub-option-code
View
Layer 2 Ethernet port view, Layer 2 aggregate interface view
Default level
2: System level
Parameters
vlan vlan-id: Specifies the ID of a VLAN, in the range of 1 to 4094.
sub-option sub-option-code: Specifies the number of the sub-option. Currently, only sub-option 9 is
supported.
string user-string&<1-8>: Configures the content of the sub-option, a case-sensitive string of 1 to 63
characters. &<1-8> represents that you can enter a maximum of 8 strings separated by spaces.
Description
Use dhcp-snooping information sub-option to configure a sub-option.
Use undo dhcp-snooping information sub-option to restore the default.
By default, no sub-option is configured.
This configuration applies to the private padding format only. To configure the private padding format,
use the dhcp-snooping information format private 1 command.
If no content is configured for sub-option 9 with the string user-string option, the primary device uses
sysname and the primary address of the Loopback0 interface to pad sub-option 9 and the secondary
device uses sysname to pad sub-option 9. The device configured with the dhcp-snooping information
58