Udp Helper Configuration Commands; Display Udp-Helper Server; Reset Udp-Helper Packet - HP 6125G Command Reference Manual

UDP helper configuration commands

display udp-helper server

Syntax
display udp-helper server [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
2: System level
Parameters
interface interface-type interface-number: Displays information of forwarded UDP packets on a specified
interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display udp-helper server to display the information of forwarded UDP packets on the specified
interface or all interfaces.
If interface-type interface-number is not specified, this command displays the information of forwarded
UDP packets on all interfaces.
Examples
# Display the information of forwarded UDP packets on the interface VLAN-interface 1.
<Sysname> display udp-helper server interface vlan-interface 1
Interface name
Vlan1
The output shows that the destination server corresponding to the interface VLAN-interface 1 is in the
public network, the IP address of the destination server is 20.1.1.1, and that no packets are forwarded to
the destination server.

reset udp-helper packet

Syntax
reset udp-helper packet
Server VPN
97
Server address Packets
20.1.1.1 0