Dhcp-Snooping Information Circuit-Id String - HP 6125G Command Reference Manual

undo dhcp-snooping information circuit-id format-type
View
Layer 2 Ethernet port view, Layer 2 aggregate interface view
Default level
2: System level
Parameters
ascii: Specifies the code type for the circuit ID sub-option as ascii.
hex: Specifies the code type for the circuit ID sub-option as hex.
Description
Use dhcp-snooping information circuit-id format-type to configure the code type for the non-user-defined
circuit ID sub-option.
Use undo dhcp-snooping information circuit-id format-type to restore the default.
By default, the code type for the circuit ID sub-option depends on the padding format of Option 82. Each
field has its own code type.
This command applies to configuring the non-user-defined circuit ID sub-option only. After you configure
the padding content for the circuit ID sub-option using the dhcp-snooping information circuit-id string
command, ASCII is adopted as the code type. The private padding format supports only the hex code
type.
Related commands: display dhcp-snooping information and dhcp-snooping information format.
Examples
# Configure the padding format for the non-user-defined circuit ID sub-option as ascii.
<Sysname> system-view
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] dhcp-snooping information circuit-id format-type ascii

dhcp-snooping information circuit-id string

Syntax
dhcp-snooping information [ vlan vlan-id ] circuit-id string circuit-id
undo dhcp-snooping information [ vlan vlan-id ] circuit-id string
View
Layer 2 Ethernet port view, Layer 2 aggregate interface view
Default level
2: System level
Parameters
vlan vlan-id: Specifies a VLAN ID, in the range of 1 to 4094.
circuit-id: Padding content for the user-defined circuit ID sub-option, a case-sensitive string of 3 to 63
characters.
53